HP StorageWorks 2.32 SAN Switch - Manual (Page 207)

Switch View
4–51 Web Tools Version 3.0.x/4.0.x User Guide 4–51
To choose the port and ALPA that you want to graph:
1. Double-click on the folder in the Port Selection List window.
A drop-down list of ports will appear.
2. Select the port that you want to monitor or change by using one of the following
methods:
• Type the port number in the Enter /Drag Port Numbers window.
• Drag the port “folder” from the Port Selection window to the Enter/Drag Port
Number window.
3. Select the port “folder”, or the small icon that appears next to it. A drop-down list
of SID/DID files will appear.
4. Select the ALPA number that you want to graph by using one of the following
methods:
• Type the ALPA number in the Enter /drag SID Numbers window.
• Drag the ALPA “file” from the Port Selection window to the Enter/drag
ALPA Number window.
5. Select OK.
An ALPA Error graph will be displayed.
An example of an ALPA Error graph, displaying CRC errors for a given port and a
given ALPA, is shown in Figure 4–41.