HP StorageWorks 2.32 SAN Switch - Manual (Page 204)

Switch View
4–48 Web Tools Version 3.0.x/4.0.x User Guide
• SCSI Read on a LUN per port.
• SCSI Write on a LUN per port.
• SCSI Read/Write per port.
• SCSI Read per port.
• SCSI Write per port.
Each graph will prompt you with a data entry window to select the port and LUN to be
monitored, as shown in Figure 4–37.
Figure 4–37: SCSI graph data entry window
To select the port and LUN to monitor:
1. Double-click on the folder in the Port Selection List window.
A drop-down list of ports will appear.
2. Select the port that you want to monitor or change by using one of the following
methods:
• Type the port number in the Enter/Drag Port Numbers window.
• Drag the port “file” from the Port Selection window to the Enter/Drag Port
Number window.
3. Enter a LUN number in the Enter LUN Number (Hex) window.
You can enter only four LUN numbers at a time.
NOTE: If you try to enter more than four LUN masks, a warning window will appear.