HP StorageWorks 2.32 SAN Switch - Manual (Page 34)

Installing and Launching Web Tools
2–4 Web Tools Version 3.0.x/4.0.x User Guide
• The browser cache must be cleared after the installation of Fabric OS V4.0.x. The
browser may use local cache copies of .jar files and/or image files to improve
performance (depending on options selected in browser), which can cause
incorrect display.
To remove cached files from Internet Explorer:
a. Select Internet Options from the Tools menu.
b. Select the General tab.
c. Click Delete Files... (under “Temporary Internet Files”).
d. Click OK, then exit and relaunch the browser.
• Browser pages must be refreshed at every visit to ensure the correct operation of
the Switch Admin feature.
To set the refresh frequency:
a. Select Internet Options from the Tools menu.
b. Select the General tab and click Settings (under “Temporary Internet Files”).
c. Under “Check for newer versions of stored pages,” select “Every visit to the
page.”
• The correct Browser Process Model must be selected.
To select the Browser Process Model:
a. Select View > Internet Options if using Internet Explorer 4.0.x, or Tools >
Internet Options if using Internet Explorer 5.x.
b. Select the Advanced tab and click to expand the Browsing category.
c. Under “Browsing,” select “Browse in a new process” if using Internet
Explorer 4.0.x or 5.x.
Installing the Java Plug-in on the Workstation
A Java Plug-in must be installed on the workstation for the correct operation of Web
Tools. The required version depends on the operating system.
Installing the Java Plug-in on Solaris
Solaris workstations require both the Java Plug-in version 1.2.2-02 for Solaris and JRE
1,2,1 with patch.