Installation instructions – GE JV347HWW User Manual
Page 8
3$57
48$17,7<
Grease Filter only (JV338)
1
Charcoal Filter only
1
(JN327 and RN328)
Grease Filter and Charcoal Filter 2
(JV24X, JV347, JV348, JV367
and
AV447)
Mounting Screws
4
(8 - 18s x 3/4s Phillips pan
head)
Exhaust Adaptor
1
(for
3
1
ø
4
s x 10s rect. venting)
Exhaust Adaptor Screw
1
(8 - 18s x 3/8s Phillips pan
head or hex head)
8
,IWKHXQLWLVGDPDJHGLQVKLSPHQWreturn the unit to the
store in which it was bought for repair or replacement.
,IWKHXQLWLVGDPDJHGE\WKHFXVWRPHUrepair or
replacement is the responsibility of the customer.
,IWKHXQLWLVGDPDJHGE\WKHLQVWDOOHU(if other than
the customer), repair or replacement must be made by
arrangement between customer and installer.
'$0$*(²6+,30(17,167$//$7,21
3$576,1&/8'('
02817,1*63$&(
127(6
Hood width may be greater than the width of the range
or cooktop, but it may not be smaller.
Ensure the range or cooktop is installed per
manufacturer’s installation instructions.
If you are going to vent your range hood to the outside,
see the “Ducting Requirements” section for exhaust duct
preparation.
66s or more
from the
floor to the
top of the
hood
24s,30s or 36s
to
match cooktop
width
30s
min.
Bottom edge of
cabinet needs
to be 30s or
more from
the cooking
surface
Flat-blade and Phillips
screwdrivers
Pencil
Metal snips
(in some
applications)
Electric drill
Saw (saber or
keyhole)
Duct tape
Pliers
Level
Caulking
Tape measure
722/6<28:,//1(('
1/4s
pivoting
hex socket
Flashlight
Wire stripper
1/4s Nutdriver
Installation Instructions