GE JDS28DNWW User Manual

Jds28dn, Dimensions and installation information

Advertising
background image

Dimensions and Installation Information

For answers to your Monogram,

®

GE Profile

or

GE

®

appliance questions, visit our website at

geappliances.com or call GE Answer Center

®

service, 800.626.2000.

All GE ranges are equipped with

an Anti-Tip device. The installation

of this device is an important,

required step in the installation

of the range.

Listed by

Underwriters

Laboratories

JDS28DN

GE

®

30" Drop-In Electric Range with Standard Clean Oven

KW Rating

240V

11.6

208V

8.7

Specification Revised 7/11

320829

Note: Cabinets installed adjacent to drop-in
ranges must have an adhesion spec of at
least 194°.
Important
30” Drop-In Ranges are designed to hang from
the countertop. It does not rest on the floor.
For installation alternatives, refer to installation
instructions packed with product.
Note: 30” Drop-In Electric Ranges conform to
U.L. requirements for 3” minimum spacing between
range and side walls above countertop.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.

Acceptable Electrical Outlet

Area Also In Adjacent

Cabinet Or Under Floor

Conduit is 40" long

30" Min.

30" Min.

15" Min.

6" Min.

from walls

7-1/2

2-7/8"

To Front Surface

of Countertop

30

27-1/2

25

23-3/16

If necessary,

build upsides

to 1-1/4" thick

to provide

countertop

support

27

20-5/8" Door

Clearance

From Front

Surface of

Countertop

24

31-1/4

30

A/B*

Accessory

Backguard

25-3/4**

*JXS37 is 5-1/4" and JXS32 is 4"

(excluding handle)

**Total depth from wall to

front of closed oven door

including handle is 28-1/2.

Dimension and installation information are shown in inches.

Acceptable Electrical Outlet

Area Also In Adjacent

Cabinet Or Under Floor

Conduit is 40" long

30" Min.

30" Min.

15" Min.

6" Min.

from walls

7-1/2

2-7/8"

To Front Surface

of Countertop

30

27-1/2

25

23-3/16

If necessary,

build upsides

to 1-1/4" thick

to provide

countertop

support

27

20-5/8" Door

Clearance

From Front

Surface of

Countertop

24

31-1/4

30

A/B*

Accessory

Backguard

25-3/4**

*JXS37 is 5-1/4" and JXS32 is 4"

(excluding handle)

**Total depth from wall to

front of closed oven door

including handle is 28-1/2.

Above illustration intended for dimensional reference only.
Refer to photograph for actual appearance.

Advertising