Using the clock and timer, Using the o ven: using the clock and timer – GE JGBS10GEFSA User Manual

Page 12

Advertising
background image

12

49-85209-1

Using the clock and timer

Throughout this manual, features and appearance may vary from your model.

You have the choice of having the timer show the time
counting down or the time of day. In either case, the
timer will signal at the end of the timer period to alert you
that the time is up.

To Set the Clock

NOTE: When you first plug in the range or after a power
failure, the entire Clock/Timer display will light up.

1. Press the CLOCK pad.
2. Press and hold the + or – pad and the time of day will

change 10 minutes at a time. To change
the time by single minutes, give the pads
short taps.

3. Press the CLOCK pad to start the clock.

To Set the Kitchen Timer

1. Press the KITCHEN TIMER ON/OFF pad.
2. Use the + and pads to set the timer. Short taps on

the + or pad change the timer’s setting one minute
at a time. Pressing and continuing to hold the + pad
increases the setting 10 minutes at a time.

3. Once you have set your timer, press the KITCHEN

TIMER ON/OFF pad to start timing.

As the timer counts down, a signal will
indicate when one minute is left. After
this signal, the display will count down
in seconds. When time runs out, a final
signal will sound. Press the KITCHEN
TIMER ON/OFF
pad to stop the signal.

To Change or Cancel the Kitchen Timer Setting

When the timer is counting down, use the + and pad
to change the remaining time, or press the KITCHEN
TIMER ON/OFF
pad to stop the timer. The timer cannot

be cancelled unless you have fully completed “set timer”
instructions above.

Display Clock While Kitchen Timer Is Operating

Pressing the CLOCK pad while the timer is operating will not
interfere with the timer’s operation; the display will change
to show the clock, but the timer will continue to count down

and will still signal when time is up. Press the KITCHEN
TIMER ON/OFF
pad again to change the display back to
show the timer.

Clock

(on some models)

The clock on your range is powered by the range itself. No
batteries are necessary. The time is displayed with no timer
or audible alarm.
To set the clock, turn the stem left or right.
To clean the clock, see instructions on page 23.
For any repairs, call a qualified service technician.

12

6

3

9

USING THE O

VEN:

Using the clock and timer

Advertising