GE ZGP484NGRSS User Manual

Ge monogram

background image

For answers to your Monogram,


GE Profile




appliance questions, visit our website at or call GE Answer Center


service, 800.626.2000.


Specification Revised 4/11

Listed by



ZGP484NGRSS (Natural Gas)

ZGP484LGRSS (Liquid Propane)

GE Monogram


48" All-Gas Professional Range with 4 Burners, Grill

and Griddle

Dimensions and Installation Information (in inches)

Professional ranges offer a number of choices in size and
cooktop configurations.
All Professional Ranges are factory set for natural or liquid
propane gas. The correct model should be ordered for the
installation situation.

Note: Conversion kits are included with the range if the wrong
gas type was ordered. High Altitude kit, WB28K10553 for
operation above 6,000 feet (for Natural and LP gas models), is
also available. The kits must be installed by a qualified service
technician at additional cost.

Installation Information
Before installing, consult installation instructions packed
with product or online at for current
dimensional data.
A suitable 48" or wider vent hood is required for installation
over ranges with a grill and recommended for all other

Advance Planning

Refer to dimensional drawings
for appropriate placement and
necessary clearances when
planning the installation.
• Working areas adjacent to the

range should have 18" minimum
clearance between countertop and
cabinet bottom.

• Clearance between range and side

wall or combustible material must
be at least 12" on each side.

• Installation must conform with

local codes. In the absence of local
codes, the range must comply with
the National Fuel Gas Code, ANSI

This manual is related to the following products: