GE ZIC30GNDII - Manual (Page 11)

3/4" CUSTOM PANEL DIMENSIONS: 80" High Fully Integrated Installation
11
If you choose to install custom panels, they must be cut to
the dimensions shown. The panels will attach to the door
and drawers using a hook and bracket system.
EXTREMELY IMPORTANT: Custom wood panels must be at
least 3/4" thick where hooks and bracket hardware are
attached. Refer to Templates for hook and bracket location.
NOTE: This product is designed to handle ¾" panels that
are made of wood.
33-3/8" x 23" is the maximum opening for a glass
window. The opening may be smaller if desired.
Design Guide
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Drawer Panel: 9 lbs.
C Convertibe Drawer Panel: 19 lbs.
45-3/8”
33-3/8”
A
B
C
45-3/8”
7-1/2”
22-3/4”
PANELS FOR SOLID DOOR AND DRAWERS PANELS FOR GLASS DOOR
3/4" CUSTOM PANEL DIMENSIONS: 84" High Fully Integrated Installation
If you choose to install custom panels, they must be cut to
the dimensions shown. The panels will attach to the door
and drawers using a hook and bracket system.
EXTREMELY IMPORTANT: Custom wood panels must be at least
3/4" thick where hooks and bracket hardware are attached.
Refer to Templates for hook and bracket location.
NOTE: this product is designed to handle ¾" panels that
are made of wood.
33-3/8" x 23" is the maximum opening for a glass
window. The opening may be smaller if desired.
49-3/8”
33-3/8”
A
B
C
49-3/8”
22-3/4”
7-1/2”
PANELS FOR SOLID DOOR AND DRAWERS PANELS FOR GLASS DOOR
Design Tip: Some amount of each panel will be visible on the interior side of
the unit. It is recommended that both sides of each panel be finished.
*Styles must be a min 3-3/8” to cover
aluminum door frame.
*Styles must be a min 3-3/8” to cover aluminum
door frame.
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Drawer Panel : 9 lbs.
C Convertible Drawer Panel: 19 lbs.
Design Tip: If using custom panels, a cutom toe kick should be considered. The
Bottom of case is white.
Design Tip: Some amount of each panel will be visible on the interior side
of the unit. It is recommended that both sides of each panel be finished.
Design Tip: If using custom panels, a cutom toe kick should be considered.
The Bottom of case is white.
Routing of the panels is required where the hooks and brackets attach to the panels.
Routing of the panels is required where the hooks and brackets attach to the panels.