Brewer Access High-Low - Manual (Page 10)

Document # 100452 RevL 10 Printed in USA © 2013
Seat and Backrest Safety Switches
All Models
All models are equipped with safety switches. They are
located inside the backrest cover, on the seat back and
on the bottom of the chair assembly. Each safety switch
automatically stops the lowering function if an obstruction
is encountered (Figure 14).
Safety On/Off Switch
All Models
The On/Off switch (located on the back of the rear cabinet,
Figure 14) can be set to the OFF position to disable all
movement of the table. Power to the drawer warmer (if so
equipped) and other portions of the table will remain on.
Safety Switches
Located Inside
Backrest Cover
Safety Switches
Located Inside
Seat Back
(both sides)
Safety Switches
Located on
Seat Bottom Plate.
Safety On/Off Switch
Located on
Back of Table
Figure 13. Seat and Backrest Safety Switches
Figure 14. On/Off Safety Switch
Powered Backrest (Models 6500, 6501, 6800 and 6801)
Models 6500, 6501, 6800 and 6801 are equipped with
safety switches on the rear of the backrest which auto-
matically stops the lowering function of the seat and back
if an obstruction is encountered.
Depress the BACK UP pedal and remove the obstruction.
Pneumatic Manual Backrest (Models 6000 & 6001)
The safety switches automatically stop the lowering func-
tion of the seat if an obstruction is encountered.
OPERATION (continued)