Oxygen concentration test and specification, Routine maintenance / instructions to patient, Equipment provider maintenance – AirSep MN171-1 User Manual
Page 4: Service, Troubleshooting
MN171-1 Rev. A 02/14
4.3
Low Battery
4.4
Discharged Battery
4.5 Cannula Disconnect
4.6 Performance Warning
4.6.1 Focus Capacity Exceeded
4.6.2 General Malfunction
Section 5.0
Oxygen Concentration Test and Specification
Section 6.0
Routine Maintenance / Instructions to Patient
6.1
Alarm / Service Indicator
Section 7.0
Equipment Provider Maintenance
7.1
Equipment Provider Routine Maintenance
7.2
Compressor Servicing
7.3
Record Maintenance
7.4
Infection Control
7.5
Cleaning and Preparing for New Patient Use
Section 8.0
Service
Note: At this
, all
repairs must be performed at AirSep’s Service Department. If your
Focus requires service, contact your Customer Service representative to obtain an RGA
and instructions for return to AirSep.
Section 9.0
Troubleshooting
9.1
Troubleshooting Chart