JELD-WEN JII020 Premium Aluminum (A-500) and Premium Atlantic Aluminum Sliding Patio Doors User Manual
Page 3
ASSEMBLY AND INSTALLATION INSTRUCTIONS
for Premium Aluminum (A-500) and Premium Atlantic Aluminum Sliding Patio Doors (JII020)
3
MATERIALS AND TOOLS
PARTS (INCLUDED WITH PATIO DOOR)
A #8 x 1" Phillips pan head sheet metal screw
B #8 X 3/4" Phillips pan head screw
C Offset T clip (DP50 / DP80 doors only)
D Panel bumper
E Adhesive weather strip pad
F Head frame
G Left and right side frame
H Sill riser (DP 65/80 doors, only)
I Sill track
Items not shown:
- Handle package
- Door panel(s)
- Screen – (optional, on some configurations)
NEEDED MATERIALS
Note!
Follow all material manufacturers’ instructions for proper use
and compatibility. When using flashing, spray adhesive/primer, sealant
and foam products, we recommend using the same manufacturer and
verifying compatibility.
• Sealant: We recommend OSI
®
QUAD
®
Max Sealant or equivalent. This
can be used in any application and can be painted or ordered in a
color matched product, if desired.
• Non-compressible or water degradable shims, such as high-density
plastic or composite.
• Backer rod 1/8" larger than the widest portion of the gap (used in
conjunction with sealant bead).
• Liquid applied flashing (Protecto Wrap LWM 200 or equivalent).
• 4", 6", or 9" (as required by local code and window configuration)
wide self-adhesive flashing: We recommend OSI
®
QUAD
®
Butyl
Flashing Tape or equivalent.
For installation in sheathed wall or open stud construction:
• #8 x 1 1/4" corrosion-resistant, flat-head screws; (length of screw must
penetrate at least 1" into the framing).
For buck framing in a concrete (masonry) structure:
• 3/16" diameter self-tapping concrete screws (Tapcon
®
, or equivalent);
length of screw must penetrate at least 1 1/4" into the concrete
For step-down and Continuous Slab landings:
• Sill pan: It is best practice to use a pre-formed, rigid, positively sloped,
pvc pan that provides continuous support. We recommend using
SureSill™ Sloped Sill Pan™ , manufactured by SureSill™, Ltd. An
alternative would be a non-sloped pre-formed sill pan or one can be
fabricated on site from self adhesive flashing, metal or vinyl sheet
material with the proper tools and materials.
NEEDED TOOLS
• Cutting shears (sill pan)
• Tape measure
• Utility knife
• Level (4' minimum
recommended)
• J-roller
• Caulking gun
• Drill with bits (assembly)
• Construction stapler
• Putty knife
• Phillips screwdriver
• Hammer drill and masonry bits
for masonry applications
A
D
E
F
G
H
I
REMOVE PACKAGING
Remove packaging materials.
1
REMOVE PACKAGING AND INSPECT DOOR
C
B
INSPECT DOOR
• Cosmetic damage
• Included parts (See Parts List above)
• Correct product (size, color, number of panels, grid pattern, glass type,
etc.)
If any of the above represents a concern, BEFORE installing, contact
your dealer or distributor for recommendations.