Audiovox ACD-32A - Manual (Page 12)

treble adjustment (“TRE” on display panel), balance
(“BAL”), fader (“FAD”), and volume (“VOL”). The
display will return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode
by pressing the Select button
3
until the “BAS”
indication appears on the display panel. Within 5
seconds of choosing the Bass mode, press the + or
- buttons of the Level Control
2
to adjust the bass
response as desired. The bass level will be shown
by the bars on the display panel from a minimum of
----- to a maximum of ----- (a single bar in the center
of the display represents flat response). The display
will automatically return to the normal indication 5
seconds after the last adjustment or when another
function is activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble
mode by pressing the Select button
3
until the
“TRE” indication appears on the display panel.
Within 5 seconds of choosing the Treble mode,
press the + or - buttons of the Level Control
2
to
128-5272
12 of 20
11 11 11 11 11
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
OPERATING
INSTRUCTIONS
1
POWER OFF BUTTON
Press this button to turn the unit off. Use the Radio
On/Band Selector button
bl
or CD Mode Selector
cl
to turn the unit on.
2
VOLUME / LEVEL CONTROLS
To increase the volume level, press the + button.
The volume will increase and the level will be
shown by the bars under the “VOL” indication on the
display panel. To increase the volume quickly,
keep the button pressed. To decrease the volume
level, press the - button. Keep the button pressed
to decrease the volume quickly. The display will
automatically return to the normal indication 5
seconds after the last volume adjustment or when
another function is activated. These controls are
also used in conjunction with the Select button
3
to adjust the treble, bass, balance and fader levels
as described in
4
,
5
,
6
, and
7
.
3
SELECT BUTTON (SEL)
This button is used to select the audio function
(volume, bass, treble, balance or fade) to be ad-
justed using the Level Control
2
. Pressing the
Select button once will set the unit for bass adjust-
ment (“BAS” will appear on the display panel).
Pressing the button additional times will select
ACD-32A
1 dl 3
2
b u 8 ct b q
c o
d m
bl
c p
c u 9
cl b n b m
c n
b p
b s
br
cs
bt
c q dl
c m
b ocr