Audiovox ACD-32A - Manual (Page 4)

128-5272
4 of 20
3 3 3 3 3
RADIO
USETEMPLATETOCHECKOPENINGSIZE
ORTOCUTOPENINGINSOLID
DASHBOARDS
UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION
This installation is designed for cars, trucks, vans, and boats that have an existing radio opening that is
no larger than the size shown on the template provided (182mm wide x 53mm high). If the opening is
smaller than required, you can use a file to enlarge it to match the template, using the slots on the template
as a guide. If you have no existing radio opening, use the template to accurately cut the required size
as per the slots on the template.
CAUTION:
1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!
2. FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20°
OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
1.InspecttheExistingRadioOpening:
A. Use the radio opening template (supplied) to make sure the dashboard opening is the proper size.
If your vehicle does not have an existing opening of this size, it will be necessary to cut or file the
opening to these dimensions.
B. Check that there will be sufficient space behind the dashboard for the radio chassis.
2.PreparetheRadioforinstallation:
A. Carefully check the radio chassis for any shipping screws that are labeled "Remove Before
Installation" and remove them as necessary.
B. Remove the detachable front panel if it is attached to the chassis, as explained in the Operating
Instructions section of this manual.
C. Using the 2 removal tools (supplied), remove the mounting sleeve from the radio chassis as shown
in the diagram below.
3. MountingtheRadioSleeve:
A. Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large
enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not
force the sleeve into the opening or cause it to bend or bow.
B. Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the
sleeve fully inserted in the dashboard opening, bend as many of the tabs outward as necessary
so that the sleeve is firmly secured to the dashboard.
Monday-Friday
Saturday 8:30am-7:00pmEastern
9:00am-5:00pmEastern
REMOVABLEFRONTPANEL
(REFERTOOPERATING
INSTRUCTIONSFORREMOVAL)
MOUNTINGSLEEVE
MOUNTINGANGLELIMITATION
SIDEVIEW
OF
CHASSIS
20°
MAX.
20°
MAX.
FRONT
PANEL
REMOVALTOOLS
UNIVERSAL
INSTALLATION
AND
IMPORT
CAR
INSTALLATION
UNIVERSAL
INSTALLATION
AND
IMPORT
CAR
INSTALLATION
UNIVERSAL
INSTALLATION
AND
IMPORT
CAR
INSTALLATION
UNIVERSAL
INSTALLATION
AND
IMPORT
CAR
INSTALLATION
UNIVERSAL
INSTALLATION
AND
IMPORT
CAR
INSTALLATION
1-800-645-7102
HELP!