How does it work – Rocky Mountain Radar RMR-8RDS User Manual

Page 10

Advertising
background image

Antenna Type: Linear polarized Self Contained Antenna
Detector Type: Scanning Frequency Discriminator
Frequency of Operation: 10.525 GHz (X Band)

24.125 GHz (K Band)

34.700 GHz (Ka Band)

RADAR Scrambler

Frequency of Operation: 8.0-38.2 GHz
Antenna Type: Dual Ridge Cast Waveguide
Mixer Type: Custom MM wave Schottky
Doppler: FM Chirp 500-9000 Hz

LASER Detector

Receiver Type: Pulsed Laser Signal Receiver
Detector Type: Digital Signal Processor Pulse Width
Discriminator
Opto Sensor: Dual Convex Condenser Lens and High Speed
Photo Diode Detector
Spectral Response: 800-1,100nm

LIDAR Scrambler

Full laser coverage using asynchronous pulse position
modulation to confuse the lidar computer.
10

GENERAL


Temperature Range: -4 to 158°F (-20 to 70°C)
Power Requirements: 12~15V DC, 80mA nominal (Negative
Ground)

Specifications are subject to change without notice.

WARRANTY


The RMR-8RDS is guaranteed against defects in workmanship
and materials for 12 months from the date of purchase. Should
any malfunction occur, the unit would be repaired or replaced
by the factory at no charge. You may have your unit checked
free of charge at the factory during this warranty period.

Returns should be sent freight prepaid with an explanation of
the problem, your physical address (no PO Boxes), proof of
purchase, and telephone number.

Send to:

ROCKY MOUNTAIN RADAR

6469 Doniphan Drive
El Paso, TX 79932
Phone: 915-587-0307 Fax: 915-587-6408

How does it work?

The Rocky Mountain Radar scramblers are full-featured radar
and laser scramblers combining active laser and passive radar
scrambling capabilities.

Advertising