Rocky Mountain Radar RMR-8RDS - Manual (Page 7)

City and Highway Mode
City mode has two steps designed to reduce false alarms while
you are driving in or near urban areas where there are many
sources for conflicting “X” band signals such as microwave
towers and automatic door openers.
Press the City button to engage “City 1” mode.
In “City 1” mode X band will be turned off without affecting
K/Ka sensitivity.
Press the City button a second time to engage “City 2” mode.
In “City 2” mode X band will remain off and K/Ka sensitivity
will be reduced by 50%.
Press the City button a third time to engage “Highway” mode.
Select Tone
Press and hold the Power and City buttons simultaneously the
remote will change tone sound.
Language Selection (English and Spanish)
Factory default is “English”.
Press the Power and Dim (Volume up) buttons simultaneously
to select either English or Spanish for your voice alert system.
Voice Selection
Factory default is “Voice On” mode.
Hold down the Power button for two seconds to select “Voice
On” or “Voice Off” mode.
When you drive with “Voice Off” mode you will not be alerted
by voice.
VG2 Selection
Factory default is “VG2 On”.
Hold down the City button for two seconds the remote will
disengage the VG2 feature.
Press the City button a second time for two seconds the remote
will engage the VG2 feature.
Tutorial Mode
The RMR-8RDS has a tutorial mode intended to familiarize you
with the various visual display and distinct audible alerts this
unit performs.
Press the Power and Mute (Volume down) buttons
simultaneously to engage the tutorial mode.
Press any button to exit the All LED’s On status. That ends the
tutorial mode.
7