Rocky Mountain Radar RMR-C495 - Manual (Page 8)

SCRAMBLER ACTIVATION:
All scramblers are factory set to the OFF
position.
Please read instructions before activating the
scrambler.
Scrambler: RMR-C495 to turn the scrambler
on/off.
1. Press and hold the Menu button until “MENU” is
displayed.
2. Press the Menu button in increments until SCRM
is displayed. (While in the Menu mode if no button
is pressed the Menu will exit in 5 seconds.)
3. Press the Select button to turn scrambler on/off.
If the scrambler is on, the “SCRAMBLE” display
will be included in the start up sequence. If the
scrambler is off, the “SCRAMBLE” display will
not be included in the start up sequence. The
“SCRAMBLE” display is the test diagnostics for
the scrambler. During the start up sequence the
current menu settings are displayed.
RMR-C495
7