SIGMA ROX 6.0 CAD - Manual (Page 12)

ROX 6.0
www.sigmasport.com roX 6.0 Page 12
Attaching the bracket
Attaching the roX 6.0 and initial use
2.8.4 Resetting the synchronization
If a transmitter does not display any values or the wrong transmitter is
synchronized, the synchronization can be reset.
1 Press and hold the
Mode 1
button for three seconds.
“sync. reseT” flashes on the display.
2 The zeros of the speed, cadence, and heart rate values flash again while the
respective transmitters are being synchronized. Mode 1