SIGMA ROX 6.0 CAD - Manual (Page 30)

ROX 6.0
www.sigmasport.com roX 6.0 Page 30
synchronizing the chest belt
Hiking with the roX 6.0
6 Hiking with the ROX 6.0
The roX 6.0 can also be used as a hiking computer. Please use the included
wristband for hiking or running. when the roX 6.0 is attached to this wristband,
all the bike functions are hidden (but still remain saved and can be accessed on
your next bike trip). only the hiking-related functions remain. you can use your
roX 6.0 with altitude and heart rate information for hiking, climbing, skiing,
running, or other types of sport.
6.1 Synchronizing the chest belt
slightly moisten the electrodes and put on the chest belt.
Attach the roX 6.0 to the wristband. The zeros for your current heart rate flash.
The roX 6.0 synchronizes with the chest belt in less than 10 seconds.
The current heart rate then appears on the display.
6.2 Starting the hiking time
The hiking time is started and stopped by pressing the middle function button
(
LAP
).
If the hiking time is running, the icon appears on the display.
6.3 Setting the target time
1 Press the
Mode 1
button to move to the target time.
2 Press and hold the Set button for three seconds. “Target time seT” flashes
on the display.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the Mode 1 button to move to the next digit.
5 Press the
Set
button to save your setting.
“set oK” appears on the display.
6 As soon as you start the hiking time, the target time starts to count down.
7 resetting the target time to the configured start value:
Press and hold the
Reset
button for three seconds.
Note
If the target time has been exceeded, a minus sign is displayed. set the target
time to 00:00:00 to deactivate it.
Lap
Mode 2 Reset
Mode 1 Set