Sper Scientific 850023 Anemometer SD Card Logger - Manual (Page 19)

19
DATALOGGER
Preparing the Datalogger
1. Insert the SD card into the SD card socket on the
bottom of the meter, ensuring that the front of the SD
card faces the back of the meter.
2. Format the SD card as needed (see page 14).
3. Set the real time clock if using the meter for the first time
(see page 12).
4. Set the decimal type if using the meter for the first time
(see page 12.)
Auto Datalogging
1. Set the sampling time to ≥ 1 second. Refer to page 14.
2. Press REC. “REC” will appear on the LCD.
3. Press LOGGER. “REC” will flash on the LCD and the
alarm will sound while the measurement data and time
information are saved to memory.
4. To pause datalogging, press LOGGER. The meter will
temporarily stop recording and “REC” will stop flashing
on the LCD. Press LOGGER again to resume
datalogging. “REC” will flash on the LCD.
5. To finish datalogging, while the datalogger is paused,
press REC for 2 seconds or longer. “REC” will
disappear from the LCD to indicate that datalogging has
ended.