Sper Scientific 850071 Environmental Quality Meter - Manual (Page 16)

16
Air Velocity and Air Temperature
1. Plug the anemometer probe plug into the probe
input socket.
2. Press POWER to turn the meter on.
3. Press and hold FUNC to cycle through the
options until “An” appears on the LCD. Release
the FUNC button.
4. Hold the probe handle and point the probe head
toward the air flow. The air velocity value appears
on the upper display and the air temperature value
appears on the lower display.
Selecting the Air Velocity Unit
1. Press and hold UNIT. The meter will cycle through
m/s, Km/h, mph, Knot, and FPM.
2. Release UNIT when the desired unit appears
on the LCD.
Note…
To change the temperature unit, see page 13.