Sper Scientific 850071 Environmental Quality Meter User Manual
Page 22
22
DATALOGGER
Preparing the Datalogger
1. Insert the SD card into the SD card socket on the
bottom of the meter, ensuring that the front of the
SD card faces the back of the meter.
2. Format the SD card as needed (see page 14).
3. Set the clock if using the meter for the first time
(see page 11).
4. Set the decimal type if using the meter for the first
time (see page 12).
Auto Datalogging
1. Set the sampling time to ≥ 1 second (see page 13).
2. Press
REC. “REC” will appear on the LCD.
3. Press
LOGGER. “REC” will flash on the LCD. The
tone will sound as the measurement data and time
information are saved to memory.
4. To pause datalogging, press
LOGGER. The meter
will temporarily stop recording and “REC” will stop
flashing on the LCD. Press
LOGGER again to
resume datalogging.
5. To finish datalogging, pause the datalogger.
Press
REC for ≥ 2 seconds. “REC” will disappear
from the LCD to indicate that datalogging has ended.