Sper Scientific 850071 Environmental Quality Meter - Manual (Page 17)

17
Humidity and Temperature
1. Plug the probe plug into the probe input socket.
2. Press
POWER to turn the meter on.
3. Press and hold FUNC to cycle through the
options until “rH” appears on the LCD. Release
the FUNC button.
4. The humidity value appears on the upper display
and the air temperature value appears on the
lower display.
Note…
To change the temperature unit, see page 13.
Type K/J Thermometer
Note…
The anemometer probe must be disconnected from the
meter to obtain accurate Type K/J readings.
1. Press POWER to turn the meter on.
2. Press and hold FUNC to cycle through the
options until “tP” appears on the LCD. Release
the FUNC button.
3. Plug a thermocouple temperature probe (type K or J,
optional) into the type K/J thermometer socket. The
LCD will display the measurement value from the
temperature probe.