Sper Scientific 850007 Visible Light SD Card Logger - Manual (Page 13)

- 13 -
SETUP MODE
saved, the meter automatically
advances to the next setup function
(i.e., after setting the real time clock,
the meter will automatically enter the
decimal type setup function).
1. Press POWER to turn the meter
on.
2. Press SET for 2 seconds or
longer to enter Setup Mode.
3. Press NEXT to cycle through the
setup functions.
Note
Press ESC to exit Setup Mode. The
meter will return to Normal Mode.
Real Time Clock
1. Enter the clock function from
Setup Mode (as described
above). “dAtE” appears on the
LCD.
2. Press ENTER. The year will
appear on the LCD.