Sper Scientific 850007 Visible Light SD Card Logger - Manual (Page 14)

- 14 -
SETUP MODE
3. Press ▲ or ▼ to adjust the value.
Press ENTER to save the value.
4. Repeat Step 3 to adjust the
month, date, hour, minute and
second.
Note
This procedure adjusts the meter’s
internal clock. The internal clock will
function when the meter is turned off
but only when the batteries have
adequate power (not with low battery
power.)
Decimal Type
Although the decimal is commonly
expressed as the “.” symbol (i.e., 20.6
or 1000.53), some (European)
countries use a “,” symbol to
represent the decimal (i.e., 20,6 or
1000,53). The meter defaults to the
period symbol. To adjust:
1. Enter the decimal type function
from Setup Mode (see page 13).
“dEC” appears on the LCD.