Sper Scientific 850007 Visible Light SD Card Logger - Manual (Page 26)

- 26 -
DATALOGGER
Preparing the Datalogger
1. Insert the SD card into the SD
card socket on the bottom of the
meter, ensuring that the front of
the SD card faces the back of the
meter.
2. Format the SD card as needed
(see page 17).
3. Set the clock if using the meter for
the first time (see page 13).
4. Set the decimal type if using the
meter for the first time (see page
14.)
Auto Datalogging
1. Set the sampling time to ≥ 1
second. Refer to page 16.
2. Press REC. “REC will appear on
the LCD.