Sper Scientific 850057K AquaShock pH Kit User Manual
Page 13
13
Recall Memory
1. Press
RANGE to select the scale (pH or mV) for recall.
2. Press
MR to enter Recall Mode and view the last measured
value. The date and time are on cyclical display.
3. Press
↑ or ↓ to scroll saved data points.
4. Press
EXIT to return to Normal Mode.
Clear Memory
1. Press
MI and MR simultaneously for 2 seconds to clear all
memory. The meter will return to Normal Mode.
Maximum, Minimum, and Average
1. Press
RANGE to select the scale.
2. Press
MAX/MIN/AVE, the maximum recorded value will
appear on the LCD. The date and time is on cyclical display.
3. Press
MAX/MIN/AVE, the minimum recorded value will
appear on the LCD. The date and time is on cyclical display.
4. Press
MAX/MIN/AVE, the average recorded value will appear
on the LCD. The date and time is on cyclical display.
5. Press
MAX/MIN/AVE to return to Normal Mode.
Hold
1. Press
HOLD to hold the value.
2. Press
HOLD to release the hold value.
Note...
When in Hold Mode, all other functions will be disabled
except turning the meter off, backlight function, saving, and
exiting Hold Mode.