Sper Scientific 800007 Thermometer 2 Channel Type K/J - Manual (Page 4)

4
Measurement Mode
1 . Press the
POWER button .
2 . Press the °C/°F button to select the
temperature scale . “°C” or “°F” will
appear on the LCD .
3 . Press the TYPE button to select your sensor
type . “K” or “J” will appear on
the LCD .
4 . To select sensor type for T2 (model 800007
only), press and hold the T1-T2 button and
T2 will appear on the primary display (the
upper half of the LCD) . Press the TYPE
button to select “K”
or “J” sensors .
5 . The thermometer will automatically
save your sensor choice when the meter is
turned off, and will return to the saved type
when the meter is turned back on .
6 . Insert the probe plug(s) into the PROBE
INPUT socket . Be sure to match the plug’s
polarity to the input’s polarity
( - + ) .
7 . Temperature reading(s) will appear on the
LCD . For 800007, the T1 reading appears
on the primary display and T2 reading on the
lower display .
MEASUREMENT PROCEDURES