Sper Scientific 800007 Thermometer 2 Channel Type K/J - Manual (Page 5)

5
Note…
To obtain the most accurate reading, the
probe plug must be the same temperature
as the socket .
Hold Mode
1 . Press the
HOLD button during
measurement to freeze the displayed
temperature . “HOLD” and the temperature
are shown .
2 . Press the HOLD button again to exit
this mode .
Note...
When the Hold function is enabled, all
function keys are disabled except for the
POWER button .
Maximum/Minimum Mode
The thermometer must be in the Max/Min
Mode to display max, min or average values .
These values are not updated during
temperature readings taken in the standard
Measurement Mode .
Note…
The POWER, C/F, TYPE, REL and T1-T2
buttons will not operate in Max/Min Mode .
MEASUREMENT PROCEDURES