Sper Scientific 800007 Thermometer 2 Channel Type K/J - Manual (Page 9)

9
You can adjust the offset to compensate for
meter and probe error .
1 . Press and hold
REL to enter offset
setup mode .
2 . Press TYPE or POWER to increase or
decrease the offset value, respectively .
The maximum adjustment is ±5°C or ±9°F .
3 . Press MAX/MIN to save and leave
offset mode .
4 . For 800007 only: To adjust the offset
on another channel, press T1-T2 and
repeat steps 2-3 .
Note...
The thermometer will save the offset value when
the meter is turned off, and will default to the
saved value when the meter is turned back on .
OFFSET ADJUSTMENTS