Yetter Avenger 30 Coulter User Manual
Page 10
Advertising
10
ASSEMBLY INSTRUCTIONS
STEP 12. An eccentric bushing allows centering of the close wheels on the row. To properly apply
pressure on both sides of the slot when closing the trench. When adjusted properly, the closing wheels
are centered on the trench. To adjust, loosen the ½” x 6 ½” hex bolt that attaches the closing wheel
assembly to the wheel mount bracket. Rotate eccentric bushing with wrench to align closing wheel
assembly with center of trench. Tighten bolt that attaches closing wheel arm to wheel mount bracket.
Advertising