Yetter Avenger 30 Coulter - Manual (Page 6)

6
ASSEMBLY INSTRUCTIONS
STEP 2. Attach the 2986-211 Rear Knife Arm to the 2986-111 hub assembly using (4) ½” x 1-1/2” hex
head bolts. Make sure that the mount for the knife is on the same side of the arm as the spindle/blade.
STEP 3. Attach the 2986-213 Closing System Mount to the 2986-211 Knife Arm using (2) ½” x 3” hex
head bolts and (1) ½” x 1 ½” hex head bolt and ½” hex lock nuts.
STEP 4. Attach the 2986-212 Closing System Adjustment to the 2986-213 Closing System Mount Bracket
using (2) ½” x 1 ½” hex head bolts and ½” hex lock nuts.