Yetter Avenger 30 Coulter - Manual (Page 9)

9
ASSEMBLY INSTRUCTIONS
STEP 9. Attach the 6200-201 Closing Wheel Bracket to the 2986-212 adjustment bracket using (2) ½” x
1-½” hex head bolts and lock nuts. NOTE: Securely tightening the bolts at this step is not necessary
because the infield height adjustment will be done later for proper operation of the closing system.
STEP 10. Assemble the 6000-002 Close Wheel Kit as shown in illustration below.
STEP 11. Attach the 6000-002 Close Wheel Assembly to the 6200-201 Close Wheel Mount Bracket by
first inserting the hook of the spring through the hole of the mount bracket then use (1) ½” x 6 ½” hex
head bolt, eccentric bushings and ½” lock nut.