Yetter 71 Series Planter - Manual (Page 10)

10
PLANTING UNIT ASSEMBLY
HOPPER BOTTOM-BEETS, LOW-RATE
SORGHUM OR CUCUMBER
1. Install cutoff (A) in hopper bottom.
NOTE: Be certain cutoff is bottomed in
hopper bottom ring.
2. Install seed plate (A) and drive
plate (B).
3. Install false ring (A).
4. Install complete floor plate (B).
5. Secure cutoff and complete floor plate
assembly to hopper bottom with hinge
pin (C) and cotter pin.
6. Hold parts in place with floor plate
spring (D).