Planting unit assembly – Yetter 71 Series Planter User Manual
Page 12
Advertising
12
PLANTING UNIT ASSEMBLY
HOPPER BOTTOM-SOYBEANS AND
COTTON SEED (ACID, FLAME, ZIP OR
MECHANICALLY DELINTED)
NOTE: Stirring rod (A) must be removed
when planting soybeans or acid delinted
cotton to prevent hard driving.
1. Install cutoff (A) and floor plate (B) on
hopper bottom and secure with hinge pin
(C) and cotter pin. Seat bottom under floor
plate spring (D).
Be certain cell filter springs ride
directly over cells in seed plate.
2. Install seed plate (A).
3. Close hopper floor plate and secure under
floor plate spring (A).
Advertising