Yetter 71 Series Planter - Manual (Page 21)

21
OPERATING THE PLANTER
CENTERING PRESS WHEEL
If press wheel (A) does not track directly behind seed opener (B), loosen round head bolts
(C) behind drive chain housing.
Align press wheel so drive chain housing is at right angle to the toolbar. Tighten round
head bolts.
If press wheel frame becomes
loose, loosen jam nut on bolt
(A) and tighten bolt. Tighten
jam nut. If press wheel does
not float, loosen jam nut and
bolt (A). Tighten jam nut.
A