Planting unit assembly – Yetter 71 Series Planter User Manual
Page 8
Advertising
8
PLANTING UNIT ASSEMBLY
HOPPER BOTTOM-CORN, SOYBEANS,
ACID
DELINTED
COTTON
AND
REGULAR-RATE SORGHUM.
1. Install cutoff (A) in hopper bottom.
NOTE: Be sure cutoff is bottomed in hopper
bottom ring as shown above.
2. Install seed plate (A) and drive plate (B).
3. Install drive plate retainer in floor plate
with retainer (A).
4. Install complete floor plate (B).
5. Secure cutoff and complete floor plate
assembly to hopper bottom with hinge
pin (C) and cotter pin.
6. Hold parts in place with floor plate spring
(D).
Advertising