Assembly instructions general information, Bolt torque – Yetter 6300 Coulter Cart User Manual

Page 4

Advertising
background image

4

ASSEMBLY INSTRUCTIONS

GENERAL INFORMATION

Examine all equipment carefully for damage or shortages.

Lubricate all bearings and moving parts as assembled.

Reference to front, rear, left and right in this installation instruction are made when setting in the operator’s
seat facing direction of forward travel.

BOLT TORQUE

READ THESE INSTRUCTIONS FIRST:

1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts

are staying tight.

4. The chart below is a guide for proper torque. Use it unless a specified torque is called out

elsewhere in the manual.

5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the

handle or bar.

6. Use a torque wrench whenever possible.

The following table shows torque in ft. lbs.

Advertising