Yetter 6300 Coulter Cart - Manual (Page 6)

6
ASSEMBLY INSTRUCTIONS
Hanger Bar
STEP 1. Attach the hanger bar assembly to the 8” x 8” center frame using the 4) 1” x 11” hex bolts and 1”
hex lock nuts. The right rear bolt is also used to attach the toolbar depth indicator 6300-347. Position the
assembly on the center frame with 6300-212 toolbar flange plate w.a. hook over the drawbar flange plate.
Torque the 1” bolts to 670 ft. lbs.
STEP 2. Attach the toolbar depth gauge to the rear of the toolbar using 1) ¾” x 5” x 6-1/2” u-bolt, 6300-348
strap, and ¾” lock nuts. Locate the depth gauge up to the right hand side of the center frame.