Flaming River Comet/Falcon Rack and Pinion Cradle 1960-65 - Manual (Page 6)

Original System Removal
5. Remove the pitman arm from the steering box using a pitman arm puller.
Note: If the vehicle is equipped with power steering remove any power steering lines connected to
valve and drain the system.
6. Remove the two (2) bolts that retain the idler arm to chassis.
7. Remove the cotter pins and the castle nuts from the outer tie rod ends, using a pickle fork remove
the tie rod ends from the spindle arms and then remove the steering linkage from the vehicle.
Pitman Arm
Idler Arm
Outer Tie Rod Ends
8. Remove the three (3) bolts that hold the
steering to chassis and remove the
steering box from the car.
5
Flaming River Industries
1-800-648-8022
081511