Flaming River Comet/Falcon Rack and Pinion Cradle 1960-65 - Manual (Page 7)

Installation of Flaming River Tilt Column
1. Slide new swivel fl oor mount over the column tube (Picture A) so the swivel portion of the fl oor
mount is at the end of he column tube (Picture B). Next place the column through the fi rewall and
loosley mount the fl oor mount to hold the column in place.
A B
2. Place the rubber spacer into the factory
under dash mount and trim away excess.
Next, making sure the column is straight, fi t
the under dash mount to the new Flaming
River steering column and then mount the
steering column in the factory original
position.
New Flaming River steering
column installed.
6
Flaming River Industries
1-800-648-8022
081511