Flaming River Camaro Rack & Pinion Cradle Kits 1970-81 - Manual (Page 10)

70-81 Camaro Rack & Pinion Cradle System
70-81 Camaro
Rack & Pinion Steering
100808 revised
9
2) To install the Flaming River rack and travel bar system rotate the travel bar over the lip of the cross
member, next position the rack into place and install the rack to the cradle using the mounting
brackets provided. Once you have adjusted the pinion angle tighten the 4 mounting bracket bolts and
the 2 ¼-20 set screws to lock the rack in place.
3) Install the inner and outer tie rod assembly into the travel bar assembly and adjust tie rods until the
original zerk to zerk measurement taken before disassembly is obtained.