Flaming River Chevelle/El Camino Rack and Pinion 1968-72 - Manual (Page 11)

Rack & Pinion Cradle System
68-72 GM A Body
Power Steering
01/15/07
9
Steering Wheel Installation
1) Install horn contact kit into canceling cam tube and turn to lock.
2) Align steering wheel adapter so that the canceling cam hole is at approx the 11 o’clock position and
that one of the steering wheel mounting holes is at the 12 o’clock position.
3) To install the wheel adapter run the horn contact wire through the hole for the canceling cam and
place the adapter on to the splined column shaft.
4) Tighten the adapter-retaining nut until the adapter is approximately 1/16” away from the column
shroud.