Flaming River Nova Rack and Pinion Cradle Kits 1962-67 - Manual (Page 10)

Page 9 of 10
Modified on 18 Feb 08
JJ/RD/RP/BC
Steering Wheel Installation
1) Install horn contact kit into canceling cam tube and turn to lock.
2) Align steering wheel adapter so that the canceling cam hole is at approx the 11 O’clock
position and that one of the steering wheel mounting holes is at the 12 O’clock position.
3) To install the wheel adapter run the horn contact wire through the hole for the canceling cam
and place the adapter on to the splined column shaft.
4) Tighten the adapter-retaining nut until the adapter is approximately 1/16” away from the
column shroud.