Flaming River Nova Rack and Pinion Cradle Kits 1962-67 - Manual (Page 11)

Page 10 of 10
Modified on 18 Feb 08
JJ/RD/RP/BC
Power Steering Bleeding Procedure
1) Fill the reservoir with high-quality power steering fluid and allow to sit for 2 minutes
2) Raise the front end of the vehicle so the wheels are just off the ground. Rotate wheels back and
forth at least 20 times. Have an assistant check and maintain fluid level while performing this
operation.
3) Start the engine and recheck fluid level. Add fluid if necessary.
4) With the engine running, rotate the steering wheel back and forth from lock-to-lock. Repeat several
times. Check fluid level and add fluid if necessary.
5) Lower the vehicle on the ground and with the engine running, repeat step 5. Check fluid level and
add if necessary
Torque Specs
Cradle to Frame Mounting Bolts
3/8” Mounting Bolts 40-45 ft lbs
5/16” Mounting Bolts 30-40 ft lbs
Outer Tie Rod Ends to Spindle 30-40 ft lbs
Universal Joint Set Screws 25 ft-lbs
Billet Rack Mounting Clamps 45-50 ft-lbs