Flaming River FR1052 Electro-Wizard - Manual (Page 9)

FR1052
Positive disconnection 12V
INSULATED SOLENOID (power supply coil from battery)
The versatility of Flaming River’s FR1052 Disconnect Switch allows for
multiple installation options based upon user need and vehicle applica-
tion.
Options:
A Include positive or negative electrical disconnection
B Positive or negative switching.
C Continuous operator controlled remote “on”, and Passive disconnect
via vehicle ignition off.
E The addition of the FR1053 Time Delay Relay makes the switch suit-
able for vehicles requiring a Selective Catalytic Reduction cleaning
cycle or other custom features.
The disconnect switch should be located as close as possible to the
battery.
Common Installations:
Operator controlled ON-OFF (+/- disconnect and switching)
1. Positive or negative battery cable is connected to terminal 30-31.
2. Vehicle load (+/-) is connected to terminal 30A-31A
3. User determines +/- switching. Term. 85 switched for negative,
Term. 86 switched for positive. Un-switched side: 85 chassis
ground, 86 positive. (Any style of “maintained” switch is
acceptable, 10 amp or greater)