GReddy INTERCOOLERS: Mitsubishi Evolution 2001-07 / Type24V - Manual (Page 4)

２ ２ ２ ２． ． ． ． Stock Parts Removal
２－１ Remove the Negative terminal from the battery.
２－２ Remove all engine under covers.
２－３ Remove front bumper cover.
２－４ Remove the air outlet fitting.
２－５ Remove air hose A/B/C and air pipe A/B.
２－６ Remove the stock Intercooler 。
３ ３ ３ ３． ． ． ． Kit Installation
３ ３ ３ ３－ － － －１ １ １ １ Intercooler Installation
（１） Install the steel stay as shown in the image.
Utilize the factory nut to secure the stay.
Parts used: < １１ >
（２） Install the other 2 steel stays in the positions
shown in the image. Utilize #16 hardware.
Parts used: < １１ , １６ >
Please refer to the Manufacturer Repair Manual for proper
procedure for stock parts removal.