GReddy INTERCOOLERS: Mitsubishi Evolution 2001-07 / Type24V - Manual (Page 5)

（ 3 ） Use the provided 20mm spacer and M8 bolts to mount
the steel pipe to the frame in two locations.
Parts used: < １８ , １９ >
（ 4 ） Install the Intercooler securing it with #17 hardware
to the stays installed in part 1 & 2 above.
Parts used: < １ , １５ , １７ >
３ ３ ３ ３－ － － －２ ２ ２ ２ Intercooler Inlet side piping
（１） Install the Intercooler piping I-1 using the provided
gasket.
Parts used: < ２ , １３ >
（２） Install Intercooler piping I-2 between the Intercooler
inlet and I-1 as shown. Use the provided silicon
hoses and hose bands.
Parts used: < ３ , ５ , ６ , ８ , ９ , １０ >
Ｉ－２
Ｉ－１