GReddy TURBO KITS: Honda Civic Si 2002-05 / T517Z - Manual (Page 12)

3-7 Oil
Return Installation
(1) Install the provided oil return pipe
to the turbocharger using the provided
gasket and hardware as shown.
(Parts used #24, 46, 60)
(2) Remove the oil drain bolt and install the
provided oil return banjo bolt using
spacer and copper washers as shown.
(Parts used #25, 26, 27)
(3) Wrap the provided 16 ∅hose with thermo
cloth. Then Install the hose to connect
the oil return pipe from the turbo to the
oil return banjo fitting on the oil pan.
* Route the hose behind the intermediate
drive shaft as shown.
(Parts used #30, 36, 49)
(4) Install the Oil return hose bracket to the
block and secure the hose to the
bracket using provided zip ties as
shown.
(Parts used #50, 54)
(5) Modify the drive shaft heat shield by
cutting the shaded area in the picture to
prevent the hose from rubbing up on the
shield.