Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 21)

16

Mode: Shows your current connection mode.

Access Account: Enter the account provided by your ISP.
 Access Password: Enter the password provided by your ISP.
 MTU: Maximum Transmission Unit. This is the size of the largest data packet that
can be sent over the network. The default value is 1492. Do NOT modify it unless
necessary. If a specific website or web application software cannot open or be
enabled, you can try to change the MTU value to 1450, 1400, etc.
 Service Name: The connection name for the current PPPOE. Enter it if required,
otherwise leave it blank.
 AC Name: The service name. Enter it if required, otherwise leave it blank.
 Connect Automatically: Connects automatically to the Internet after rebooting the
system or after a connection failure.
 Connect on Demand: Connects to the internet whenever internet activity is
detected (e.g., checking email). After a set period of time, the connection will be
terminated (Max Idle Time). A setting of zero means you will be connected to the
Internet at all times. Otherwise, enter the number of minutes of inactivity before you
are disconnected from the internet.
 Connect Manually: Users connect to the internet manually.
 Connect on Fixed Time: Connects to the internet automatically at the time specified.
NOTE: