Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 41)

36
WPS/PBC negotiation between them. When the WPS connection is
completed, the LED indicator will be continuously lit. To add more clients,
repeat the above steps.)

PIN: If this option is enabled, you need to enter a wireless client's PIN code in
the field and use the same code for the WPS client.

Reset OOB: Press this button, the WPS client will be in an idle state, and the WPS
indicator will turn off. The AP will not respond to the WPS client's connection request
and will set the security mode as Open-None (Disable) mode.
NOTE:
The use of the WPS function requires the use of wireless adapter.
5.2.2 WPA-PSK
The WPA (WiFi Protected Access) method guarantees protection of WLAN users' data and
only the authorized network users can access the WLAN.
 Security Mode: Select the proper security mode from the drop-down menu.

WPA Algorithms: Allows the use of TKIP (Temporal Key Integrity Protocol), AES
(Advanced Encryption Standard), or both.

Key: Enter a pass phrase that consists of 8-63 ASCII characters.

Key Renewal Interval: Set the key's renewal period, which tells the device how